Enthermics offers in its line of blanket and fluid warmers the opportunity for the customer to match the right temperature to the right product. Blankets, irrigation fluids, and injection fluids generally need to be warmed to different temperatures, and this can be accomplished in Enthermics machines. This is our WarmRight® Concept.
Enthermics warmers allow temperature stabilization for blankets, irrigation fluids, and injection fluids at three different set-point temperatures in three different chambers:
- Blankets can be warmed up to 200°F
- Irrigation fluids up to 150°F
- Injection fluids up to 104°F
The two temperature ranges for fluid warming are based on the recommendations of the fluid manufacturers. The fluid warmers must be set to warm either irrigation or injection fluids; if both need to be warmed at different temperatures, two warmers (chambers) are required. Our warmers contain one or two chambers, and are blanket or fluid warming depending on the model or configuration ordered. Our EC1540b/l combination unit has two chambers, one for blankets and one for fluids. Other models can be stacked one-on-top-of-the-other allowing many different blanket/blanket, blanket/fluid, and fluid/fluid warming configurations to be created to warm the right way. Our stacking option is not only available when two new units are purchased?it can be utilized later when one new warmer is ordered to be stacked on an existing, previously purchased machine. Please call us at 1-800-TO-B-WARM with any questions.
